smart 4
Merging three devices
Electrosurgery+
SMART Seal +
SMART Ablation
in one unit
Merging three devices
Electrosurgery+
SMART Seal +
SMART Ablation
in one unit
Smart Output Power Adjustment
In common devices, the output power of the device decreases by a change in the tissue type and impedance. Then, in order to solve this deficiency, the output current and voltage are measured continuously and the output power is adjusted smartly based on the target tissue resistance. This leads to delivering a fixed power within a wide range of tissues, minimizing thermal effect and the risk of burning.
Plug &Play
This unit recognizes the surgical instruments connected to the system smartly and adjusts the operating mode and output power automatically based on the connected instruments.
Ease of Activation
To make it easily applicable, SMART Seal and SMART Ablation can be activated using a handpiece and a footswitch.
Technical Specification:
Input Voltage: 210 – 230 VAC or (100 – 120 VAC*)
Input frequency: 50- 60 Hz
Max supply Current: 2.92 A or (5.8 A*)
Main fuses: 2 × 4 AT, 250 VAC or (2 × 6.3 AT, 250 VAC*)
Weight: 10.5 Kg
Dimensions (W x H x D): 40 × 16.7 x 48 Cm
*Depends on customer request
Safety features:
Accordance with EN60601-1 (2006/A1: 2013),
EN60601-2-2 (2009), EN60601-1-2 (2015), EN 62304: 2006
Type of output: CF
Neutral Electrode-Earth connection: Floating Output
HF leakage Current: Monopolar < 150 mA, Bipolar <50 mA
LF Leakage Current: Normal condition < 10 μA
Single fault condition < 50 uA
Protection class: I
Sink current < 500 A
SMART-4 Features:
Compatible with Argon Plasma Coagulation unit
Compatible with SMART Ablation instrument
Double synchronous monopolar outputs
Appropriate for Cardiac and Thoracic surgery
Appropriate for TUR surgery
Five working modes on Cut Mode
Five working modes on Coagulation Mode
Two working modes on Bipolar Mode
Two working modes on SMART Vessel Sealing Mode
Two working modes on SMART Ablation Mode
Auto start/ Auto stop of Bipolar system
Equipped with HF Leakage / OUTPUT EPR / TIMEOUT ERR recognition systems
Fully compatible with split and non-split patient return electrode (Diagnosing contact quality to the patient’s body) Separate footswitches for activating Monopolar, Bipolar and SMART PARTS systems
Compatible with SmartSeal instruments
Appropriate for endoscopic polypectomy, papillotomy and ERCP
